某中东油田中心处理站工艺优化初探

doi:10.3969/j.issn.1005-8168.2020.01.010

Petrochemical Design ›› 2020, Vol. 37 ›› Issue (1): 36-39.doi: 10.3969/j.issn.1005-8168.2020.01.010

• PROCESS OPTIMIZATION • Previous Articles Next Articles

Preliminary Study on Process Optimization of CTEP

Li Leibo, Wang Yabiao

SINOPEC Engineering Incorporation, Beijing, 100101

Received:2019-09-11 Accepted:2019-09-11 Online:2020-04-23 Published:2020-04-23
Contact: Li Leibo, Wang Yabiao,lileibo@sei.com.cn E-mail:lileibo@sei.com.cn

Abstract

Abstract: The terminal oil and gas processing capacity of the CTEP in an oil field in the Middle East was improved by optimizing the crude oil processing process and equipment. The stability of gas phase was enhanced by optimizing the internal design of slug catcher, the equipment setting was optimized by optimizing the gas compression process, and the equipment selection was optimized and the investment was saved by optimizing the Phase I and Phase II gas materials. By optimizing the overall process flow and simplifying the gas compression process, the goals of steady production, investment saving and operating cost reduction were achieved, the energy was saved and the efficiency was enhanced

Key words: CTEP, process, optimization, gas-liquid, separation, slug trapping

Li Leibo, Wang Yabiao. Preliminary Study on Process Optimization of CTEP[J].Petrochemical Design, 2020, 37(1): 36-39.

[1]	Sun Di, Wang Zeliang, Zhang Yili，Zhang Yuanqi. General Layout Optimization of Petrochemical Plant [J]. Petrochemical Design, 2020, 37(1): 5-7.
[2]	Chang Weixian. Types of Reboiler and Technical Analysis of Its Application [J]. Petrochemical Design, 2020, 37(1): 19-22.
[3]	Su Weiqun, Yan Qinfeng. Type Selection of Flow Control Valve in Pumping Loop of PX Adsorption Separation Unit [J]. Petrochemical Design, 2020, 37(1): 26-28.
[4]	Chen Gang. Study on Washing Process in Oxidative Dehydrgenation of Butylene to Butadiene [J]. Petrochemical Design, 2020, 37(1): 29-31.
[5]	Ruan Yuhong, Liu Kaixiang. Updated Development of Continuous Liquid-phase Hydroprocessing Technology and Its Industrial Application in DHT Unit [J]. Petrochemical Design, 2019, 36(4): 1-5.
[6]	Xue Nan. Application of Combined Technology of Centrifugal Flash and Fiber Oil Removal in Rich Amine Treatment [J]. Petrochemical Design, 2019, 36(4): 6-8.
[7]	Xu Biao, Jin Lei, Duan Fei, Wang Lianglong. Optimization of Design Scheme for Low Temperature Sulfuric Acid Alkylation Unit [J]. Petrochemical Design, 2019, 36(4): 24-27.
[8]	Li Yahua, Wang Jiakun, Xie Keqian, Yuan Xiaoyun, Dai Weiwei, Zhang Guolei. Analysis of Revamping Effect of a 1.4 Mt/a RFCC Unit [J]. Petrochemical Design, 2019, 36(3): 7-.
[9]	Zhang Zhumei. Application of Flow Integration and Low Temperature Oil Absorption Technology in Light Ends Recovery Unit [J]. Petrochemical Design, 2019, 36(3): 28-.
[10]	Du Danchao. Application of INPLANT Software in Design of Cooling Water Pipe Network [J]. Petrochemical Design, 2019, 36(3): 32-.
[11]	Liu Xiaobo, Wang Yu, Nie Cheng. Design to Prevent Back Flow and Pressure Breakthrough at High Pressure Pump Outlet in Hydroprocessing Unit [J]. Petrochemical Design, 2019, 36(2): 4-5.
[12]	Gao Jing. Process Development and Optimization of Hydrogen Recovery Unit in Polypropylene Plant [J]. Petrochemical Design, 2019, 36(2): 18-22.
[13]	Wang Yubing. Technological Development and Engineering Application of the First Localized Para-xylene Complex in China [J]. Petrochemical Design, 2019, 36(1): 28-30.
[14]	Xu Bujian, Jiang Bo, Wang Jiakun, Wang Jiakang, Xie Keqian. Analysis on Control Scheme of Hairpin Heat Exchanger in FCC Unit [J]. Petrochemical Design, 2018, 35(4): 22-24.
[15]	Geng Shuyuan. Energy-saving Optimization Design of Heat Transfer Network in Methanol Distillation Process [J]. Petrochemical Design, 2018, 35(4): 32-34.

Preliminary Study on Process Optimization of CTEP

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0