石油化工设计 ›› 2020, Vol. 37 ›› Issue (1): 15-18.doi: 10.3969/j.issn.1005-8168.2020.01.004

• 设计技术 • 上一篇    下一篇

焦炭塔冷焦及冷焦水处理工艺技术的探讨

黄孟旗   

  1. 中国石化工程建设有限公司,北京 100101
  • 收稿日期:2019-11-25 接受日期:2019-11-25 出版日期:2020-04-23 发布日期:2020-04-23
  • 通讯作者: 黄孟旗,huangmengqi@sei.com.cn E-mail:huangmengqi@sei.com.cn
  • 作者简介:黄孟旗,男,2004年毕业于中国石油大学(华东)化学工程与工艺专业,工学学士,高级工程师,现任工艺室副主任,长期从事炼油工艺设计和技术开发工作,已发表论文1篇。联系电话:010-84878649;E-mail: huangmengqi@sei.com.cn

Discussion on Coke Quench Processes and Coke Cooling Water Treatment Technologies

Huang Mengqi   

  1. SINOPEC Engineering Incorporation, Beijing, 100101
  • Received:2019-11-25 Accepted:2019-11-25 Online:2020-04-23 Published:2020-04-23
  • Contact: Huang Mengqi,huangmengqi@sei.com.cn E-mail:huangmengqi@sei.com.cn

摘要: 介绍了溢流和泡焦两种冷焦工艺的原理和主要特点,并进行了技术比较。改进的溢流冷焦工艺流程和常规溢流冷焦工艺流程相比具有流程简单、投资和操作费用低、占地面积小等优点,但冷焦放水时存在蒸汽弥漫及含硫气体排放等问题。改进泡焦工艺流程对冷焦放水进行单独处理,避免了放水过程中的蒸汽弥漫及含硫气体释放,同时降低了冷焦放水罐的清罐频次

关键词: 冷焦, 溢流, 泡焦

Abstract: The principle and main characteristics of two coke quench processes, i.e. the overflow process and the soaking process, were introduced and compared. The improved overflow coke quench process is superior to the common overflow process due to its simpler process flow, lower investment and operating cost and less floor area. However, the pervasion of steam and the emission of sour gas still need to be solved. For the improved soaking process, such problems were avoided by separately treating the coke cooling water, and the cleaning frequency of coke cooling water tank was also reduced

Key words: cold coke, overflow, soaking