稳定重汽油再切割技术的应用

doi:10.3969/j.issn.1005-8168.2023.04.005

稳定重汽油 ,切割中汽油 ,数据标定 ," /> 稳定重汽油 ,切割中汽油 ,数据标定 ,"/> Application of Recutting Technology for Stabilized Heavy Gasoline

Petrochemical Design ›› 2023, Vol. 40 ›› Issue (4): 18-21.doi: 10.3969/j.issn.1005-8168.2023.04.005

• ENGINEERING AND APPLICATION • Previous Articles Next Articles

Application of Recutting Technology for Stabilized Heavy Gasoline

Wang Hui, Ma Zhiyuan, Yu Aijun, Zhang Peng

CNOOC Zhongjie Petrochemicals Co., Ltd., Cangzhou, Hebei, 061101

Received:2023-01-16 Online:2023-11-25 Published:2023-11-17

Abstract

Abstract:

Due to the influence of purchased naphtha, the aromatization unit of a company has been operated at a low load. In order to ensure the safe and efficient operation of the unit and improve the economic benefit of the company, a cutting system is to be installed downstream the stabilizer of gasoline hydrodesulfurization unit to cut the intermediate components of heavy gasoline at the bottom of stabilizer and sent them to the aromatization unit. This article focuses on the calibration data analysis and operation summary of the new fractionation column after it is put into use.

Key words: , stabilized heavy gasoline；cutting medium gasoline；data calibration

[1]	Zhang Zizhou. Design and Research on Smoke Control Systems for Blast Resistant Control Rooms [J]. Petrochemical Design, 2023, 40(4): 62-66.
[2]	Sun Siyuan. Influence of Safety Factor on General Layout in Petrochemical Industry Design [J]. Petrochemical Design, 2023, 40(3): 7-11.
[3]	Mu Yu. Discussion on Design of Office Buildings in Petrochemical Projects [J]. Petrochemical Design, 2023, 40(3): 12-16.
[4]	Zhou Shumin. A Calculation Method for Anchor Bolt Circle Diameter of Non-standard Leg Support with Angle Strut [J]. Petrochemical Design, 2023, 40(3): 17-19.
[5]	He Yuxi. Discussion on Material Selection for Low-temperature Pressure Vessel [J]. Petrochemical Design, 2023, 40(3): 20-24.
[6]	Shi Hengtong. Application of Structural Mechanics Concept in Structural Design and Optimization [J]. Petrochemical Design, 2023, 40(3): 28-31.
[7]	Shi Wenli. Equipment Layout Optimization of Reactor and Regenerator Structure in CCR Unit [J]. Petrochemical Design, 2023, 40(3): 51-55.
[8]	Liu Lu. Piping Design of Atmospheric Column in Slurry Bed Residue Hydrocracking Unit [J]. Petrochemical Design, 2023, 40(3): 56-59.
[9]	Wang Binghan. Practice and Exploration of Petrochemical Projects in Integrated Design [J]. Petrochemical Design, 2023, 40(3): 60-62.
[10]	Zhang Haibo. Application olant steam banlion in theoof Low-pressure Saturated Steam Compression in Steam System Optimization of Aromatics Complex [J]. Petrochemical Design, 2022, 39(3): 9-12.
[11]	Cheng Guangwei, Sun Hao, Lu Kuanhua. Debottlenecking Reconstruction of Butene-1 Refining Unit [J]. Petrochemical Design, 2022, 39(3): 61-64.
[12]	. Deep-cut Revamping of 2.5 Mt/a Atmospheric and Vacuum Distillation Unit [J]. Petrochemical Design, 2021, 38(3): 4-9.
[13]	Yang Jiupo. #br# Heat Transfer Calculation and Operation Optimization of Steam Generator for Residue Hydrocracking Unconverted Oil [J]. Petrochemical Design, 2021, 38(3): 14-18.
[14]	Wei Yuan. Gas Chromatography Configuration in Central Laboratory of Refinery and Petrochemical Complex [J]. Petrochemical Design, 2021, 38(3): 37-42.
[15]	Hu Yu, Zhang Xide. Influence of Position Change of Valve Volume Regulating Mechanism on Compressor Temperature and the Solutions [J]. Petrochemical Design, 2021, 38(3): 43-46.

Application of Recutting Technology for Stabilized Heavy Gasoline

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Application olant steam banlion in theoof Low-pressure Saturated Steam Compression in Steam System Optimization of Aromatics Complex

Metrics

Comments

Recommended 0