干气密封 , 一级泄漏气 , 推环 , 随动性 , 气膜间隙 ," /> 干气密封 , 一级泄漏气 , 推环 , 随动性 , 气膜间隙 ,"/> dry gas seal,primary leakage,throw-out collar,follow up,air film gap ,"/> <p class="MsoNormal" align="left" style="text-align:left;"> <b>增压氢压缩机干气密封故障原因分析<span></span></b>

石油化工设计 ›› 2021, Vol. 38 ›› Issue (3): 10-13.doi: 10.3969/j.issn.1005-8168.2021.03.003

• 设计技术 • 上一篇    下一篇

增压氢压缩机干气密封故障原因分析

    

  1. 中国石油化工股份有限公司镇海炼化分公司机动处,浙江 宁波 315207
  • 收稿日期:2020-10-16 出版日期:2021-08-25 发布日期:2021-08-09
  • 作者简介:张弼,男, 2004年毕业于浙江大学过程装备与控制过程,主要从事设备技术管理工作,工程师。电话:0574-86444461

Failure Analysis of Dry Gas Seal in Pressurized Hydrogen Compressor

Zhang Bi   

  1. SINOPEC Zhenhai Refining & Chemical Company, Ningbo, Zhejiang, 315207
  • Received:2020-10-16 Online:2021-08-25 Published:2021-08-09

摘要:

针对中石化镇海炼化分公司炼油单元重整装置增压氢压缩机高压缸干气密封运行中出现一级泄漏气流量、压力下降为零的情况,进行深入分析,通过对密封结构、安装数据、静试情况、状态监测、工艺数据等多方面的比对探究,查找问题发生的缘由,明确造成本次密封故障的根本原因,并相应采取了针对性的措施应对,同时为防范同类问题的再次出现提供了理论依据和实践经验。

关键词:

干气密封 ')">"> 干气密封 , 一级泄漏气 , 推环 , 随动性 , 气膜间隙

Abstract:

The flow rate and pressure of the primary leakage gas dropped to zero during the dry gas seal operation of high pressure cylinder of pressurized hydrogen compressor in the reforming unit at SINOPEC Zhenhai Refining and Chemical Company. This paper makes an in-depth analysis on the sealing structure, installation data, static test situation, condition monitoring, process data and other aspects to identify the root causes of the sealing failure and puts forward some corresponding countermeasures, providing theoretical basis and practical experience for preventing similar problems from appearing again.

Key words: dry gas seal')">

dry gas seal, primary leakage, throw-out collar, follow up, air film gap