浅谈防喘振阀的工程设计选型要点

doi:10.3969 /j.issn.1005-8168.2021.01.006

石油化工设计 ›› 2021, Vol. 38 ›› Issue (1): 19-21.doi: 10.3969 /j.issn.1005-8168.2021.01.006

浅谈防喘振阀的工程设计选型要点

陈超

中国石化工程建设有限公司，北京 100101

收稿日期:2020-04-07 接受日期:2020-04-07 出版日期:2021-02-23 发布日期:2021-02-23
通讯作者: 陈超，chenchao@sei.com.cn E-mail:chenchao@sei.com.cn
作者简介:陈超，男，2014年毕业于中国石油大学（华东）化工过程机械专业，硕士，工程师，主要从事炼化行业机械设计工作。联系电话：010-84877717；E-mail：chenchao@sei.com.cn

Discussion on Anti-surge Valve Selection in Engineering Design

Chen Chao

SINOPEC Engineering Incorporation, Beijing, 100101

Received:2020-04-07 Accepted:2020-04-07 Online:2021-02-23 Published:2021-02-23
Contact: Chen Chao，chenchao@sei.com.cn E-mail:chenchao@sei.com.cn

摘要/Abstract

摘要： 从离心压缩机防喘振阀的型式选择、CV值计算选用、防喘振阀的速开时间、防喘振阀流量特性等方面，详细介绍了离心式压缩机防喘振阀的选用要点。从工程实际的角度介绍了不合适的CV值或速开时间过长可能导致的喘振问题，并提供了可行的解决思路，对离心压缩机防喘振阀的合理选用有一定指导意义

关键词: 防喘振阀, CV值, 速开时间, 动态模拟

Abstract: This paper introduces in detail the key points in the selection of anti-surge valve for centrifugal compressor from the aspects of the type selection of anti-surge valve, the calculation and selection of CV value, and the quick opening time and flow characteristics of anti-surge valve. Based on practical engineering, inappropriate CV valve and long quick opening time may cause surging problems. Some feasible solutions are put forward, providing guidance for the rational selection of anti-surge valve for centrifugal compressors.

Key words: anti-surge valve, CV value, quick opening time, dynamic simulation

陈超. 浅谈防喘振阀的工程设计选型要点[J]. 石油化工设计, 2021, 38(1): 19-21.

Chen Chao. Discussion on Anti-surge Valve Selection in Engineering Design[J]. Petrochemical Design, 2021, 38(1): 19-21.

[1]	徐上峰. 动态模拟在离心压缩机防喘振系统设计中的应用[J]. 石油化工设备技术, 2018, 39(4): 1-4.
[2]	卜洪清. 生产废水回用为循环冷却水补水[J]. 石油化工安全环保技术, 2015, 31(2): 57-60.

浅谈防喘振阀的工程设计选型要点

Discussion on Anti-surge Valve Selection in Engineering Design

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

Metrics

本文评价

推荐阅读 0