石油化工设计 ›› 2020, Vol. 37 ›› Issue (1): 29-31.doi: 10.3969/j.issn.1005-8168.2020.01.008

• 工艺优化 • 上一篇    下一篇

丁烯氧化脱氢制丁二烯装置水洗工艺研究

陈钢   

  1. 中国石化工程建设有限公司,100101
  • 收稿日期:2019-10-21 接受日期:2019-10-21 出版日期:2020-04-23 发布日期:2020-04-23
  • 通讯作者: 陈钢,chengang@sei.com.cn E-mail:chengang@sei.com.cn
  • 作者简介:陈钢,女,1996年毕业于大连理工大学有机化工专业,高级工程师,从事碳四分离的工艺设计及技术开发工作。联系电话:010-84876831;E-mail: chengang@sei.com.cn

Study on Washing Process in Oxidative Dehydrgenation of Butylene to Butadiene

Chen Gang   

  1. SINOPEC Engineering Incorporation, Beijing, 100101
  • Received:2019-10-21 Accepted:2019-10-21 Online:2020-04-23 Published:2020-04-23
  • Contact: Chen Gang,chengang@sei.com.cn E-mail:chengang@sei.com.cn

摘要: 通过PRO-II流程模拟考察了丁烯氧化脱氢制丁二烯装置水洗单元的工艺操作条件对酸、醇、醛、酮等含氧有机物脱除效果的影响。模拟结果表明,在水冷塔顶洗水温度<20℃、水气比0.5~0.6,洗醛塔操作压力0.6~0.8MPa、塔顶洗水温度10~20℃、水气比0.7~1.0的适宜工艺条件下,水洗后生成气中酸、醇、酮可以完全脱除,乙醛、丙烯醛含量(φ)小于10*10-6

关键词: 丁烯, 丁二烯, 氧化脱氢, 水洗, 流程模拟, 有机物脱除

Abstract: The influence of process conditions of the washing unit in oxidative dehydrogenation of butylene to butadiene on the removal effect of organic compounds such as acid, alcohol, aldehyde and ketone was studied through process simulation with PRO-II software. The results indicated that the oxygen-containing organic compounds in effluent gas from the oxidative dehydrogenation reactor can be effectively removed, the acid, alcohol and ketone can be totally removed and the concentration of acetaldehyde and acrylaldehyde in the gas stream was less than 10 ppm(v) when the water temperature is below 20℃ and the mass ratio of water to feed gas is 0.5~0.6 in the cooling column, and the operating pressure is 0.6~0.8 MPag, the overhead temperature is 10~20℃ and the mass ratio of water to feed gas is 0.7~1.0 in the aldehyde removing column

Key words: butylene, butadiene, oxidative dehydrogenation, washing process, process simulation, organic compounds removal